Pet Gear PG8800 Instruction Manual page 5

STROLLER ASSEMBLY
Step 2. To install the handle, place handle ends
Handle Locking Mechanism
G.
into the handle-locking mechanisms on each
side of the stroller.
Then, push down until you hear a click and the
velco pins pop out on each side.
Velco Pins
Velco Pin
Choose height level (1 or 2), then release
velco pins.
Pull up on handle to make sure it is securely locked. This is shown in Figure G.
TO USE FRONT WHEEL LOCKING MECHANISM
To engage front wheel-locking mechanism so that the front wheel does
Lock
not swivel, (best when stroller is used for fast walking or running), make
sure wheel is facing forward (so red tab is at the front of stroller) and
pull the red tab up.
To disengage locking mechanism so that the front wheel swivels, (for
easy steering), push tab down.
Unlock
5
EXPEDITION PET STROLLER • PG8800