Page 1
For The ON-THE-GO Pet ™ INSTRUCTION MANUAL PG8140NZ Interior Dimensions: 20"L x 12"W x 18.5"H To see our full line of products, visit us online at: www.petgearinc.com CUSTOMER SERVICE HELP DESK customerservice@petgearinc.com Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday...
PARTS LIST Check that you have all the parts shown BEFORE assembling your product. If any parts are missing, call Customer Service. Stroller Cup Holder 2-Rear Wheels 2-Front Wheels UNFOLDING THE STROLLER Step 1. Spread handle (A) and seat apart until the frame clicks and locks on both sides.
Page 3
TO ASSEMBLE REAR WHEELS TO FRAME Step 1. Push rear wheel onto frame until it clicks and locks into place on both sides. TO ASSEMBLE FRONT WHEELS Step 1. Push front wheels onto stroller tubing until steel pin locks (pops out). Push wheels onto stroller frame Step 2.
Page 4
INSTRUCTIONS FOR BRAKE USE Apply brake lever by pushing down with toe. Ensure brakes are applied when parking stroller. Release by lifting brake lever with toe. WARNING: Never leave your stroller parked without applying brakes. Back View of Stroller Brake is applied when lever is down. Brake is not applied when lever is up.
Page 5
TO USE FRONT WHEEL LOCKING MECHANISM Step 1. To engage the front wheel locking mechanism so that the front wheel does not swivel (best when the stroller is used for fast walking or running) pull tab up. Step 2. To disengage the locking mechanism so that the front wheel swivels (for easy steering) push tab down.
Page 6
USING CARRIER WITH STROLLER Place carrier onto stroller frame and lock latch downwards on both sides to secure. Push latch down to lock. VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ...
PARTS LIST Check that you have all the parts shown BEFORE assembling your product. If any parts are missing, call Customer Service. 1 Side support bar with seat belt holder. 1 Side support bar. View 360 Carrier 2 Bottom support bars. PRODUCT SET UP Unfold metal wires on the bottom of the View 360 Carrier.
Page 8
Next, secure velcro on Secure bottom velcro points first to the bottom wires. each side of carrier. Push button to open carrier. Push top portion of latch down into the lower portion of latch to close carrier. Push button to open. VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM ·...
Page 9
ASSEMBLY INSTRUCTIONS FOR BOOSTER BASE Push down until steel pin locks on bottom support bar. Insert side support bar into each of the bottom support bars Insert side support bar with seat belt holder into each of the bottom support bars Push down until steel pin locks on bottom support bar.
Page 10
SECURING BOOSTER SEAT FRAME Place latch in Place latch in down position. down position. Seat belt Place seat belt in this location. After seat belt is in position lock latch to secure seat belt. Seat belt VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ...
Page 11
USING BOOSTER SEAT Place carrier onto base and lock latch downwards on both sides to secure carrier to base. Push latch down to lock. VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ...
Page 12
Place seat belt through the seat belt strap located on the back of car seat/carrier. Seat Belt Seat Belt Strap Strap Click seat belt into place. Never leave your pet unattended in your car. Always use a pet harness. VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ...
LOOKING AFTER YOUR STROLLER • Always store product in a clean, dry place. • Not recommended for use on the beach. • Do not put heavy items on top of the stroller. • Clean frame by wiping with a lightly oiled cloth. •...
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, warnings and the instructions could result in serious injury or death.
Need help?
Do you have a question about the PG8140NZGAU and is the answer not in the manual?
Questions and answers