Unpacking; Hookup Overview - Sony STR-D560Z Operating Instructions Manual

Getting Started Getting Started

Unpacking

Check that you received the following items with the
receiver:
• FM wire antenna (1)
• AM loop antenna (1)
• Remote commander (remote) (1)
RM-P501 (STR-DE915/DE715/D660Z only)
RM-U501 (STR-DE615/D560Z only)
• Size AA (R6) batteries (2)
• Audio/video cable (1)
(STR-DE915/DE715 (USA, Canada) only)
• Control S cord (1)
(STR-DE915/DE715 (USA, Canada) only)
Inserting batteries into the remote
Insert two size AA (R6) batteries with the + and - on
the battery compartment. When using the remote,
point it at the remote sensor g on the receiver.
z
When to replace batteries
Under normal use, the batteries should last for about 6
months. When the remote no longer operates the
receiver, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
4
}
]
]
}

Hookup Overview

The receiver allows you to connect and control the
following audio/video components. Follow the
hookup procedures for the components that you want
to connect to the receiver on the pages specified. To
learn the locations and names of each jacks, see "Rear
Panel Descriptions" on page 36.
TV/VCR Hookups (9)
Digital Component
Speaker
Hookups (10)
System
DVD player
Hookups
(6)
TV
Front
VCR
speaker
(L)
LD player
POWER
TONE
SUR INDEX
VIDEO 1 VIDEO 2 VIDEO 3 LD / DVD TV/DBS
DPC
MODE
SPEAKERS
A
OFF B
A + B
PRESET
TUNING 1 2 3 4 5 DIRECT
TUNING
- + - +
VIDEO FUNCTION
6 7 8 9 0 SHIFT
PHONES
FM MODE FM / AM DISPLAY MEMORY
Rear
CD player Center
speaker
speaker
(L)
Tape deck
DAT/MD deck
Turntable
Audio Component
Hookups (5)
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the AC power cords until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum
and noise.
• When connecting an audio/video cable, be sure to
match the color-coded pins to the appropriate jacks
on the components: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.
Antenna Hookups (5)
AM/FM antenna
Front
speaker
Active
(R)
woofer
MASTER VOLUME
TAPE DAT / MD CD TUNER PHONO
DIRECT PASS
DISCRETE
BALANCE
BASS
BOOST
DIRECT SOUND FIELD
PASS SET UP ON / OFF
GENRE MODE
AUDIO FUNCTION INPUT L R
MODE
VIDEO 3 INPUT
VIDEO L AUDIO R
Rear
Wireless
speaker
rear
(R)
speaker
Video camera
recorder
Video game