Sony STR-D560Z Operating Instructions Manual page 27

Adjusting the equalizer parameters
(STR-DE915 only)
Adjust the equalization (bass or treble) of the front,
center and rear speakers for optimum sound.
The following adjustments effect all sound fields
simultaneously.
1
While playing a component, press DPC MODE
repeatedly until the TONE indicator lights up.
2
Use the digital processing control buttons (
) to select the parameter to be set and use the
buttons ( / ) to select the setting.
To set Select
bass level of the F: BASS
front speakers
bass frequency of F: BASS
the front speakers
treble level of the F: TREBLE
front speakers
treble frequency of F: TREBLE
the front speakers
bass level of the C: BASS
center speaker
bass frequency of C: BASS
the center speaker
treble level of the C: TREBLE
center speaker
treble frequency of C: TREBLE
the center speaker
bass level of the rear R: BASS
speakers
bass frequency of R: BASS
the rear speakers
treble level of the R: TREBLE
rear speakers
treble frequency of R: TREBLE
the rear speakers
3
Repeat Step 2 if necessary.
z
You can turn off the equalizer adjustments without
erasing them Z
press EQ/TONE on the remote.
Note
You may hear some noise as you adjust the parameters.
Adjusting the tone parameter (STR-DE715/
DE615/D660Z/D560Z only)
Adjust the tone (bass or treble) of the front, center and
rear speakers for optimum sound. You can adjust the
tone of all sounds fields, including Dolby Surround.
1
2
/
3
And set between
–10.0dB and +10.0dB
(in 0.5 dB steps)
z
99Hz and 992Hz (in
21 levels)
–10.0dB and +10.0dB
(in 0.5 dB steps)
1.0kHz and 8.6kHz
(in 21 levels)
Adjusting the delay time (STR-DE715/
–10.0dB and +10.0dB
DE615/D660Z/D560Z only)
(in 0.5 dB steps)
You can make the surround sound more effective by
99Hz and 992Hz (in
delaying the output from the rear speakers (delay
21 levels)
time). You can select a delay time of 15, 20, and 30 ms.
–10.0dB and +10.0dB
Set a short delay time when the rear speakers are
(in 0.5 dB steps)
located in a large room or far from your listening
1.0kHz and 8.6kHz
position.
(in 21 levels)
1
–10.0dB and +10.0dB
(in 0.5 dB steps)
99Hz and 992Hz (in
2
21 levels)
–10.0dB and +10.0dB
(in 0.5 dB steps)
3
1.0kHz and 8.6kHz
(in 21 levels)
4
Getting Started
Sound Adjustment
Press DPC MODE repeatedly until the TONE
indicator lights up.
Use the digital processing control buttons (
) to select BASS or TREBLE.
Use the digital processing control buttons (
) to adjust the tone level.
The adjusted tone level is stored automatically.
You can turn off the tone adjustments without
erasing them
The tone adjustments and on/off setting are stored
separately for each sound field. Press DPC MODE
repeatedly to turn off the TONE indicator.
Start playing a program source encoded with
Dolby surround sound.
Press DPC MODE repeatedly until the SUR
indicator lights up.
Use the digital processing control buttons (
) to select the delay time.
The current delay time appears in the display.
Use the digital processing control buttons (
) to adjust the delay time.
/
/
/
/
27