Sony STR-D560Z Operating Instructions Manual page 38

Additional Information
Remote Operates
Button
0-9, >10 Receiver
CD player/MD
deck/LD player
TV/VCR
CH/PRESET Receiver
+/–
TV/VCR
DISC CD player
D.TUNING Receiver
D. SKIP CD player
CD/DVD
player
0/) Tape deck/MD
deck/VCR/LD
player
=/+ CD/DVD
player/
MD deck/LD
player
P
CD/DVD
player/Tape
deck/MD
deck/LD
player/VCR
( CD/DVD
player/Tape
deck/MD
deck/LD
player/VCR
p CD/DVD
player/Tape
deck/MD
deck/LD
player/VCR
9 Tape deck
r
Tape deck
r + ( Tape deck/MD
deck/VCR
38
Function
Selects preset numbers
Selects track numbers.
0 selects track 10.
Selects channel numbers
Scans and selects preset
stations
Selects preset channels
Selects discs (CD player
with multi-disc changer
only)
Selects the direct tuning
mode
Skips discs (CD player with
multi-disc changer only)
Searches tracks (forward or
backward)
Fast forwards or rewinds
Skips tracks
Pauses play or record. (Also
starts recording with
components in record
standby.)
Starts play
Stops play
Starts play on the reverse
side
Sets tape decks to the record
standby mode
Starts recording when
pressed with ( (or 9
on tape deck)
Remote Operates
Button
RMS Tape deck
DIRECTION
RMS CLEAR Tape deck
RMS Tape deck
DIRECTION
9/(
ENTER TV/VCR/DBS
tuner/CD
player
VISUAL DVD/TV/
POWER VCR/DBS
tuner/LD
player
TV CONTROL TV
ON
-/- - TV
SUB CH +/– TV
POSITION TV
SWAP TV
P IN P TV
JUMP TV
ANT TV/VTR VCR
MASTER VOL TV
+/–
MUTING TV
SLOPE —
BAND —
*
RMS: Random Music Sensor
**
Only for Sony TVs with the picture-in-picture function
Function
Selects tape direction (tape
*
decks with the RMS
function only)
*
Clears RMS program (tape
decks with the RMS
function only)
Programs tracks (tape deck
*
with the RMS function
only)
Changes channels/discs
when used with 0-9
Turns on or off the power
Turns on the TV, switches
the input to "TV," and sets
the remote to operate the TV
Selects the channel entry
mode, either one or two
digit (in Europe only)
Selects preset channels for
**
the small picture
Changes the position of the
**
small picture
Swaps the small and the
**
large picture
Activates the picture-in-
**
picture function
Jumps back and forth
between the previous and
current channels
Selects output signal from
the antenna terminal: TV
signal or VCR program
Normally, adjusts the
master volume of the
receiver.
If TV CONTROL ON was
pressed, it adjusts the
volume on the TV.
Normally, mutes the sound
from the receiver.
If TV CONTROL ON was
pressed, the sound on the
TV itself is muted.
Not applicable
Not applicable