Naming The Preset Stations; Organizing The Preset Stations - Sony ST-SB920 Operating Instructions Manual

Advanced Tuner Operations

Naming the Preset Stations

You can assign a name up to 13 characters long to each
preset station except FM RDS stations. When the
station is tuned in, the station name will appear instead
of the frequency.
ST-SB920
SHIFT
ST-SE520
SHIFT
EON
TA NEWS / INFO PTY DISPLAY
AUTO-BETICAL
MEMORY FM MODE BAND
SELECT
MEMORY
1
Press CHARACTER.
The cursor flashes in the display.
2
Turn TUNING/SELECT to select a character.
3
When the character you want appears, press
CHARACTER to move the cursor into position for
the next character.
If you make a mistake
Press CHARACTER repeatedly until the character
you want to change flashes (every time you press
CHARACTER, the next character flashes). Then
turn TUNING/SELECT to select a new character.
4
Repeat steps 2 and 3 until the station name you
want appears in the display.
5
Press MEMORY.
"MEMORY" appears along with the lowest vacant
code to indicate that the tuner is ready to store the
station.
6
Press SHIFT and one of the preset buttons to
specify the preset where you want to store the
station name.
GB
12
Numeric
TUNING/
buttons
SELECT
TUNING / SELECT
g
1 2 3 4 5 6 7 8 9 0
SHIFT DIRECT
TUNING MODE
EON AUTO–BETICAL
DISPLAY PTY TA NEWS/INFO SELECT MEMORY BAND ON/OFF ANTENNA FM MODE CHARACTER MENU RETURN ENTER
RDS • ACTIVE SELECTION MODE MENU ENTRY
MEMORY CHARACTER
CHARACTER
CHARACTER TUNE MODE
MENU RETURN
SHIFT 1 2 3 4 5 6 7 8 9 0 DIRECT
Numeric
TUNING/
SELECT
buttons
Note
The display returns to normal display mode if you stop
assigning names for more than 8 seconds. If this happens,
start again from the beginning.
z
To see the frequency of the displayed station name
Press DISPLAY repeatedly.

Organizing the Preset Stations

This tuner makes it easy to arrange preset stations in
the order you prefer. You can arrange all the preset
stations automatically, according to alphabetical order,
signal strength, country code, or tuner band, or you
can use the Move and Erase functions to move and
erase specific preset stations.
ST-SB920
TUNING / SELECT
ENTER
ST-SE520
EON
TA NEWS / INFO
AUTO-BETICAL MEMORY FM MODE
SELECT
1
Press MENU.
2
Turn TUNING/SELECT until "Edit" appears in
the display and press ENTER.
If no stations have been stored as presets, "No
Preset" appears in the display.
3
Turn TUNING/SELECT to select one of the
following sorting methods:
TUNING / SELECT
g
SHIFT 1 2 3 4 5 6 7 8 9 0 DIRECT
TUNING MODE
EON AUTO–BETICAL
DISPLAY PTY TA NEWS/INFO SELECT MEMORY BAND ON/OFF ANTENNA FM MODE CHARACTER MENU RETURN ENTER
RDS • ACTIVE SELECTION MODE MENU ENTRY
MENU ENTER
TUNING / SELECT
PTY DISPLAY CHARACTER TUNE MODE
BAND MENU RETURN
1 2 3 4 5 6 7 8 9 0
SHIFT DIRECT
MENU
TUNING / SELECT
TUNING / SELECT
ENTER
ENTER