Attachment Assembly - Paula Deen PDOSM Instruction Manual

ATTACHMENT ASSEMBLY

How To Assemble the Scraper & Beater Attachments Together
1. Hold the scraper aRachment with the scrapers facing
upward in your hand.
2. Place the beater aRachment inside of the scraper
aRachment on an angle one side at a Kme.
3. Press on the inside housing of the beater aRachment by the
tab and click the tab over the beater housing.
4. Repeat with the tab on the other side of the housing. The
scraper and beater should be firmly in place. (See figure
below for reference)
5. To assemble the beater aRachment into the bowl, firmly
press the beaters and scrapper onto the rod in the middle
of the bowl.
Note: The beaters can be used without adding the scraper. Do
not use the scraper without ingredients inside the bowl as this
will damage the silicone on the scraper.
8