Using The Blender - Paula Deen PDOSM Instruction Manual

USING THE BLENDER

1. Place the blender on the smaller hole on the base of
the unit. Place the cover on the open mixer opening
before use. See page 9 for assembly instructions.
2. Make sure the power knob is at "0" before plugging in
the unit for proper use. Then plug the unit into a power
socket.
3. Insert desired ingredients into the blender. Once
desired ingredients are inside place the lid on the unit.
4. Select desired speed by turning the power knob to the
right, the speeds are marked Min. to Max. Min. being
the least powerful and Max. being the most powerful.
To pulse the ingredients turn the power knob to the left
to the "P" position.
5. To pause or stop when mixing turn the power knob to
"0".
6. Take the blender off the base.
7. Remove ingredients. Use the spatula to help remove
ingredients from the blender if needed.
12