Rod Assembly - Paula Deen PDOSM Instruction Manual

• Keep hands and utensils out of the blender to reduce the risk of severe
injury to persons or damage to the blender. A scraper may be used but
only when the blender is not running.
• The blades on the blender are sharp, use cauKon when handling.
• Always place the cover on the blender when in use.
• It is not recommended to blend hot liquids in the blender.
• Never feed food by hand into the blender, always use a food pusher.
• The use of unauthorized aRachments is not recommended by the
appliance manufacturer, this could cause injuries or damage to the
unit.
• This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it sKll does not fit, contact a qualified electrician. Do not modify
the plug in any way.
• SAVE THESE INSTRUCTIONS.

ROD ASSEMBLY

Place the rod with the opening
in the boRom into the mixer
hole. Turn the rod clockwise
unKl it no longer moves and
is in place. The mixing bowl can
be placed on top of the rod. The
rod will need to be removed
when using the blender.
7