Adjusting The Audio Emphasis - Sony MHC-W555 Operating Instructions Manual

Adjusting the audio
emphasis
You can adjust the audio emphasis using the
graphic equalizer and surround effect.
Adjusting the graphic
equalizer
You can adjust the sound by raising or
lowering the levels of specific frequency
ranges.
Before operation, first select the audio
emphasis you want for your basic sound.
1/u
(power)
1
Select the audio emphasis you want
for your basic sound (see "Selecting
the audio emphasis").
2
Press OPEN/CLOSE or place your
hand to the sliding sensor to slide
the panel.
3
Press EQ +/– button for the desired
frequency band to adjust level.
RELAY
t
DAILY 1 2 REC SLEEP DAILY 1 2 REC SLEEP
ß
1
DOLBY NR DOLBY NR
ALL ALL 1 DISCS
PROGRAM
SHUFFLE SHUFFLE
REPEAT1 REPEAT1
Note
If you choose another menu of audio emphasis
(other than "EFFECT OFF"), the adjusted sound
effect is lost. To retain the adjusted sound effect for
future use, store it in a personal file. (See "Making a
personal audio emphasis file".)
3
2
EQ
DBFB
TUNED TUNED
STEREO STEREO
SUR
MONO MONO
SYNC SYNC
REC REC
STEP
kHz
VOLUME
MHz
Activating the surround
effect
You can enjoy the surround effect.
DELAY
1/u
REVERB
(power)
DSP
CD
SURROUND +/–
/ Press DSP - DELAYor REVERB to
activate the delay or reverb effects.
"DELAY" or "REVERB" appear in
the display.
To adjust the surround level
Press OPEN/CLOSE or place your hand to
the sliding sensor to slide the panel. Press
SURROUND +/– to adjust level. The Delay
level and the reverb level are adjusted at the
same time.
Note
When you choose other sound effects, the surround
effects will be canceled. If you want to memorize the
effect, store it into a personal file (see "Making a
personal audio emphasis file").
EQ
29