Sony MHC-W555 Operating Instructions Manual page 12

Playing a CD (continued)
To
Stop play
Pause
Select a track
Find a point in
a track
Select a CD
in stop mode
Play only the
CD you have
selected
Play all CDs
Remove the CD Press OPEN/CLOSE 6.
Exchange other
CDs while
playing
Adjust the
volume
12
Do this
Press p (p on the remote).
Press ·P (P on the remote).
Press again to resume play.
During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it
when you reach the desired
track. (Or press + (to go
forward) or = (to go back)
on the remote.)
Press and hold down ) or
0 (or )/0 on the
remote) during play and
release it at the desired point.
Press a DISC 1~3 button or
DISC SKIP/EX-CHANGE.
Press PLAY MODE
repeatedly until "1 DISC"
appears.
Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Press DISC SKIP/
EX-CHANGE.
Turn VOLUME (or press VOL
+/– on the remote).
Tips
• Pressing ·P when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
·P or the DISC 1~3 buttons (Automatic Source
Selection).
• If there is no CD in the player, "CD NO DISC"
appears in the display.
• When a disc tray is selected or the CD placed on
that tray is playing, the DISC 1~3 button for the
respective tray lights green.