Tape; Playing A Tape; Recording Onto A Tape; Synchro Recording - Sony MHC-GZR5D Operating Instructions Manual

Tape

Playing a tape
You can use TYPE I (normal) tape.
1
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly to select "TAPE. "
2
Insert a tape.
Press 
tape into the cassette holder with the
side you want to play back facing up.
Make sure there is no slack in the tape
to avoid damaging the tape or the
cassette holder.
3
Press 
The tape starts playing.
Other operations
To
Stop playback Press 
Pause playback Press 
Fast-forward
or rewind
Note
Be sure to press   on the unit after the
tape has been wound or rewound to the end.
0
GB


on the unit to insert a

on the unit.
Do this

.

. Press 

again to resume
playback.
Press  or 
Recording onto a tape
There are three ways to record on a TYPE
I (normal) tape.
Use the buttons on the unit for the
operation.
The recording level is adjusted
automatically.
CD Synchro Recording
You can record an entire VIDEO CD or
AUDIO CD onto a tape.
Manual Recording
You can record just the portion you
want from a sound source, including
connected audio components.
Sound Mixing
You can "mix" sound from any one of the
sound sources and singing or speaking
into a microphone. The mixed sound can
be recorded onto a tape.
1
Insert a recordable tape into the
cassette holder with the side
you want to record facing up.

.