Sony MHC-GZR5D Operating Instructions Manual page 107

Messages
One of the following messages may
appear or flash in the front panel display
during operation.
CANNOT PLAY
 A disc that cannot be played back was
inserted.
 A DVD VIDEO with unsupported
region code was inserted.
DATA ERROR (for USB devices)
You tried to play a track that is not
playable.
DATA ERROR (for DATA CD/DVDs)
 The MP3 audio track and JPEG image
file you want to play back is damaged.
 The MP3 audio track does not conform
to MPEG 1 Audio Layer 3 format.
 The JPEG image file does not conform
to DCF format.
 The MP3 audio track has the extension
".mp3" but it is not in MP3 format.
 The JPEG image file has the extension
".jpg" or ".jpeg" but it is not in JPEG
format.
DEVICE ERROR
The USB device could not be recognized
or an unknown device is connected.
DEVICE FULL
The USB device is full.
ERASE ERROR
Erase of audio tracks or folders on the
USB device failed.
FATAL ERROR
The USB device has been disconnected
while transferring to the USB device.
FOLDER FULL
The number of folders on the USB device
has reached the maximum.
INVALID
You have pressed an invalid button.
JPEG
The playback mode is "IMAGE" and a
JPEG image file is being played back.
NO AUDIO
The connected USB device or the loaded
DATA CD/DVD does not contain audio
tracks.
NO DEVICE
No USB device is connected.
NO DISC
There is no disc on the disc tray
NO IMAGE
The connected USB device or the loaded
DATA CD/DVD does not contain image
files.
NOT IN USE
You have pressed a button whose
operation is not allowed or invalid at that
time.
NOT SUPPORTED
 An unsupported USB device is
connected.
 The USB device is connected to this
system through a hub.
OVER CURRENT
An over current from the

was detected.

.
(USB) port

Continued
107
GB