Additional Information; Troubleshooting - Sony MHC-GZR5D Operating Instructions Manual

Additional Information

Troubleshooting

Should you encounter a problem with
your system, do the following:
1
Make sure the power cord and
speaker cords are connected
correctly and firmly.
2
Find your problem in the
troubleshooting checklist below and
take the indicated corrective action.
If the problem persists after doing all
of the above, consult your nearest Sony
dealer.
If "PROTECT" appears on the
display
Immediately unplug the power cord,
and check the following items.
 If your system has a voltage
selector, is the voltage selector set
to the correct voltage?
 Are the + and  speaker cords
short-circuited?
 Are you using only the supplied
speakers?
 Is anything blocking the ventilation
holes on the top or back of the
system?
After you have checked these above
items and found to be all right, wait
for 60 seconds and reconnect the
power cord, and then turn on the
system. If the issue persists, contact
your nearest Sony dealer.

GB
General
The system does not turn on.
 Is the power cord plugged in?
 Is the voltage selector set correctly to
match the local power line voltage?
(For models with a voltage selector
only)
The clock or timer setting is canceled.
 The power cord is disconnected or a
power failure occurred. Redo "Setting
the clock" (page 24). If you have set
the timer, redo "Using the timer" (page
85).
There is no sound.
 Press VOLUME + repeatedly (or turn
VOLUME on the unit clockwise)
 The headphones are connected to the

PHONES jack
 Check the speaker connections
(page 20).
 There is no audio output during Rec
Timer.
 The system is in pause mode, in Slow-
motion Play or in Lock Search. Press
 (or  on the unit)
playback.
 No sound is output when transferring
music to the USB device.

.
.

to start the