Installation Of Housing Onto Electric Pan-Tilt; Installation Of Housing Onto Fixed Support - Veilux SVEX-T500A User Manual

Figure 12. Pay Attention to Insulating Layer between Rear Cover and Drawer Plate
Note:
1. S/N 1 consists of 2 line groups. One group is for heating (red, 0.5mm
the common motor terminal (white, yellow);
2. S/N 2 consists of 2 line groups. One group is for heating (red, 0.5mm
the jumper from No. 2 terminal to No. 3 terminal (white);
3. S/N 3 consists of 2 line groups. One group is for the wiper limit switch (white); the other
group is the jumper from No. 2 terminal to No. 3 terminal (white);
4. S/N 4 consists of 3 line groups. One group is for the capacitor (red), one group is for the
2
motor (0.14mm , red), and the other group is for the wiper limit switch (brown).

3.4 Installation of Housing onto Electric Pan-tilt

Please refer to the instruction manual of electric pan-tilt.

3.5 Installation of Housing onto Fixed support

Insulating layer
Figure 14. SVEX-T500A Support Installation Diagram
SVEX-T500A Explosion Proof Camera User Manual.
2
); the other group is
2
); the other group is
11