Programming Video Cd/Cd Tracks - Program Play - Sony CMT-M80V Operating Instructions Manual

Playing a CD (continued)
Other operations
To
Stop play
Pause
Select a track
Find a point in
a track
(Lock Search
Function)
Play repeatedly
(Repeat Play)
Remove a disc
GB
12
Do this
Press x.
Press CD X (or X on the remote).
Press again to resume play.
Press l or L (or . or
> on the remote) repeatedly.
During playback, press m or
M. At the desired point, press
CD N (or N on the remote) to
stop searching and start playback.
Press REPEAT repeatedly during
playback until "REPEAT" or
"REPEAT 1" appears in the
display.
REPEAT: For all the tracks on the
disc.
REPEAT 1: For only the currently
playing track.
To cancel playing repeatedly, press
REPEAT repeatedly until
"REPEAT" and "REPEAT 1"
disappear from the display.
Press Z CD.
Programming VIDEO CD/
CD tracks
— Program Play
You can make a program of up to 25 tracks.
1
Press FUNCTION (or CD on the remote)
repeatedly to switch the function to CD.
2
Press PLAY MODE in stop mode
repeatedly until "PGM" appears.
3
Press . or > on the remote
repeatedly until the desired track
number appears.
Last programmed
track number
PGM
4
Press ENTER on the remote.
The track is programmed.
The step number appears, followed by the
last programmed title or track number.
5
To programme additional tracks, repeat
steps 3 and 4.
6
Press CD N (or N on the remote).
Total playing time
(including the
selected track)
MIN SEC