Specifications; Mhc-Gs300Av Only - Sony MHC-GS200 Operating Instructions Manual

Specifications

Amplifier section
MHC-GS300AV/GS200
U.S.A. models:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohms loads both channels driven, from
120 – 10,000 Hz; rated 60 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
MHC-GS300AV
Front speaker:
Continuous RMS power output
Total harmonic distortion less than 0.09%
Center speaker:
Continuous RMS power output
Rear speaker:
Continuous RMS power output
MHC-GS200
Continuous RMS power output
Total harmonic distortion less than 0.09%
US
42
60 + 60 watts
(6 ohms at 1 kHz,
10% THD)
(6 ohms at 1 kHz,
35 watts)
30 watts
(6 ohms at 1 kHz,
10% THD)
25 + 25 watts
(6 ohms at 1 kHz,
10% THD)
60 + 60 watts
(6 ohms at 1 kHz,
10% THD)
(6 ohms at 1 kHz,
35 watts)
Inputs
VIDEO (MD) IN (phono jacks):
GAME (AUDIO) IN (phono jack):
AUDIO IN (phono jacks): 450mV 47 kilohms
5.1CH INPUT (MHC-GS300AV only):
FRONT (phono jacks):
REAR (phono jacks):
CENTER (phono jack):
SUB WOOFER (phono jack):
Outputs
PHONES (stereo phono jack):
FRONT SPEAKER:
SURROUND SPEAKER REAR (MHC-GS300AV
only):
SURROUND SPEAKER CENTER

(MHC-GS300AV only):

SUB WOOFER (MHC-GS300AV only):
CD player section
System
Laser
Frequency response
Wavelength
Signal-to-noise ratio
Dynamic range
OPTICAL OUT (CD)
(Square optical connector jack, rear panel)
Wavelength
Output Level
Tape player section
Recording system
Frequency response
Wow and flutter
voltage 250 mV/450 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
accepts headphones of
8 ohms or more
accepts impedance of 6 to
16 ohms
accepts impedance of 6 to
16 ohms
accepts impedance of
6 ohms
voltage 1 V,
impedance 1 kilohm
Compact disc and digital
audio system
Semiconductor laser
( = 780 nm)
Emission duration:
continuous
2 Hz – 20 kHz (±0.5 dB)
780 – 790 nm
More than 90 dB
More than 90 dB
660 nm
–18 dBm
4-track 2-channel stereo
40 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)