Programming The Video Cd/Cd Tracks -- Program Play - Sony MHC-VX888 Operating Instructions Manual

Playing a CD (continued)
To Do this
Switch to CD Press CD or DISC 1~3
function from (Automatic Source Selection).
another source
Play repeatedly Press REPEAT repeatedly to
(Repeat Play) select "REPEAT"*
"REPEAT 1"*
Cancel Repeat Press REPEAT until "REPEAT"
play or "REPEAT 1" disappears from
the display.
Exchange other Press DISC SKIP
CDs while playing EX-CHANGE.
Remove the CD Press Z OPEN/CLOSE.
*1
All the tracks repeated up to five times.
You cannot use this function during SHUFFLE
ALL DISCS.
*2
To repeat the current track you are playing.
Tip
Pressing the CD while the power is off automatically
turns the power on and CD is selected as a function.
When the system is in the power saving mode, this
function does not work.
Programming the VIDEO
CD/CD tracks
–– Program Play
You can make a program of up to 25 tracks
from all the VIDEO CD/CDs in the order you
want them to be played.
1
Load a VIDEO CD/CD.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears in the display.
3
Press one of the DISC 1~3 buttons to
select a VIDEO CD/CD.
To program all the tracks on a CD at once,
proceed to step 5 while "AL" appears on the
display.
14
04CDP_MHC-VX888.p65 GB
4
1
or
2 .
5
6
7
To
Cancel Program
Play
Clear a track from
the end
Add a track to
the program in
stop mode
Tips
• The program you made remains in the CD player
even after it has been played back. Press nN to
play the same program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
– the total playing time has exceeded 100 minutes.
14
Press . or > repeatedly until the
track you want appears in the display.
Total playing time
(including selected
Track
Disc tray
track)
number
number
Press ENTER.
The track(s) is (are) programmed. The
program step number appears, followed by
the total playing time.
To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
Press nN.
Press
PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE"
disappears from the display.
CLEAR on the remote in stop
mode.
1 Select the disc tray with
DISC 1~3 button.
2 Select the track by pressing
. or >.
3 Press ENTER.
which exceeds 20.
3/13/01, 5:24 PM
MHC-VX888 4-232-653-11 (1)