ChinaPST PST-G10A User Manual
  1. Manuals
  2. Brands
  3. ChinaPST Manuals
  4. Security System
  5. PST-G10A
  6. User manual

ChinaPST PST-G10A User Manual

Home alarm system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Home Alarm System User Manual
Home Alarm System
User's Manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PST-G10A and is the answer not in the manual?

Questions and answers

Related Manuals for ChinaPST PST-G10A

Summary of Contents for ChinaPST PST-G10A

  • Page 1 Home Alarm System User Manual Home Alarm System User’s Manual...
  • Page 2 Home Alarm System User Manual Dear Clients, Thank you for using our GSM Alarm System . We are committed to giving you the best home security available today and take the safety of your home and family seriously. Our system allows you to instantly arm and disarm your properly, instantly change your system settings and find out your system status and much more.
  • Page 3 Home Alarm System User Manual Cautions To avoid personal inquiry and the damage to the product, please take the following preventive measures. Input voltage:DC12V 1A .Do not use power adapter with different specifications. ● Use the professional tools for assembling to avoid the damage to the main panel ●...
  • Page 4 Home Alarm System User Manual Features: ● Smart Phone APP ● 99 Zones,each zone can be renamed ● 10 zones are available for Voice Recording ● High-definition voice ● The Standard ADMECO Contact ID Protocol ● 99 wireless Zones,2 wired zones ●...

  • Page 5: Panel Diagram

    Home Alarm System User Manual Panel diagram: ○ ○ ○ ○ ○ ○...
  • Page 6 Home Alarm System User Manual ○ ○ ○ ① Digital Display ：Standby Time(Minute for 5 Seconds; Hour for 1 second) ② Set Button：To Set,Voice-Recording and Add Sensors etc. ③ SOS Button ：press to raise an emergency alarm. with more functions in setup state. ④...
  • Page 7 Home Alarm System User Manual ⑦ SIM slot：SIM ⑧ Adapter Interface：For Power Adapter ⑨ Data Interface：For upgrading Software. a）Power on/off：for Internal Battery b）Wired Interfaces： SP+/SP- ： Outputs for Wired Siren. ： 2 inputs for Wired Sensors Z1/ Z2 GND： Ground Wire Wired Interfaces diagram:...
  • Page 8 Home Alarm System User Manual SP: Wired Siren, ,SP+ for Anode, ( Please pay attention to the anode and cathode. It is likely to burn the system if you connect inversely) 1：Wired Sensor #1: Zone 98 2：Wired Sensor#2: Zone 99 Cautions：...

  • Page 9: Chapter 1:Daily Operation

    Home Alarm System User Manual Chapter 1:Daily Operation System Arm In “ARM” status, any instruction signal will be sent to alarm controlling panel and alarm panel will trigger the siren immediately. There are 4 methods to arm the system. ① Press “Arm” on remote control:...
  • Page 10 Home Alarm System User Manual ② ②Press “Arm” on APP: ③Send message with content “12341” to alarm panel. 12341: 1234 represents four digits password . If you have changed the password , plesase use your own password . For example ,if new password is 2014,then message to alarm panel phone number should be 20141.

  • Page 11: System Disarm

    Home Alarm System User Manual System Disarm In “Disarm” status, control panel is on rest .No intrusion signal will processed by control panel. There are 4 methods to disarm the system . ① Press “disarm” on remote control ② Press “Disarm” on APP...
  • Page 12 Home Alarm System User Manual ③ Send message with content “12342” to alarm panel .12342: 1234 represents four digits operate password . Plesase type your own password if you have renewed . ④ Use preset phone number (already add into system) to dial your alarm panel phone number , input password as your alarm asked , and press number key “2”.
  • Page 13 Home Alarm System User Manual ② Press “ Home Mode “ on APP: Note: After the successfull setting of home arm in the system, the "Home Arm" Operation will work.Please into "Home Arm Mode" of the Sensor to start the "Home Zone"...
  • Page 14 Home Alarm System User Manual No matter what state the control panel is in, once SOS button on the remote control is pressed, the system immediately goes into emergent alarming state. Hit the SOS button on remote control and on panel will trigger SOS alarm.

  • Page 15: System Status

    Home Alarm System User Manual System Status When you are not clear of the system status, you could use the query function. There are 2 methods to start Home Mode ① Being queried by APP, the system will reply the information: ②Send message with content “12344”...
  • Page 16 Home Alarm System User Manual Intercom There are 2 methods to start Home Mode ① USE APP to make the intercom. After getting through the phone, input the password as the voice prompt. The factory password is “1234”. Press the key “4” to make the intercom. ②...
  • Page 17 Home Alarm System User Manual Answer to the call from system After the host alarms, it will call all the preset phone numbers one by one. When the call is received, the phone speaker will broadcast the alarm record to make the alarm information known by the users.
  • Page 18 Home Alarm System User Manual How to control the System via the Phone anywhere & anytime. Call the phone number of alarm host, the host will answer the phone. The prompt voice is “di” or “please input the password”. Input the password by phone keys. The factory password of remote control is “1234”.

  • Page 19: Chapter 2: Coding Of The Wireless Accessories Into System

    Home Alarm System User Manual Chapter 2: Coding Of The Wireless Accessories Into System Add a remote control into System Disarm the system , press “SET” button on alarm panel , then you will hear a short “Beep”. Alarm panel will display a default remote number , “-1”,which is remote 1.Then you will hear a vocal instruction “remote control coding”.
  • Page 20 Home Alarm System User Manual the Host , a voice prompt of [1 Remote coding],and then press [Set] button again, a voice prompt of [Detector coding],and then trigger the Detector ,there will be a “beep” from the Host when it receives the signal from the Detector.,which means the coding with detector is successful &...

  • Page 21: Delete A Detector

    Home Alarm System User Manual Delete a Detector Disarm the system, Press [Set] button lightly, there is a beep from the Host,and [-1] displays on the Host, you will hear the voice prompt of “Remote coding”, press [set] button again to into the state for [1 Detector Coding],and the press [SOS] button to delete Detector#1, Press[Set] button again,[-2] displays on the Host,and voice prompt of [2 detector coding].
  • Page 22 Home Alarm System User Manual [0] means disable the function of connecting with wireless siren [1] means enable the function of connecting with wireless siren Can send the SMS to the host enable the function：8888411# And you can make the same settings via APP under the menu of “Other Functions” 。 ②...

  • Page 23: Chapter 3:Alarm Settings

    Home Alarm System User Manual receiving the signal, the sire will make a sound of “Di”,After the successful matching of the wireless siren, when the host alarm, the sire will beep.( Because it is controlled wirelessly, possibly there is time delay. ) Chapter 3:Alarm Settings For the all settings bellows ,You can also make it via APP,which is really simple even you don’t need the user manual,and also you can do it by calling the system via the phone,just call the system and...
  • Page 24 Home Alarm System User Manual For Example: You would like to name the “1 Zone” as “Front Door Alarm” You just need to send the SMS as bellows to the Host: [programming password 8888]+[90]+[number of the Zone]+[#]+[name of the zone in text,20 at mostl+[#],just like:88889001#front door alarm# And you can make the same setting via APP under the menu of “Change Zone Name”...
  • Page 25 Home Alarm System User Manual button to make a recording again.and if you’re satisfied with it,just press[set] shortly to record for the other Detectors. When the [LA] Displays one the Host,Press the [Set] button shortly to exit the Voice Recording. and you can make the recording for the other zones by the same way. And you can make the same settings via APP under the menu of “Change Zone Voice”...
  • Page 26 Home Alarm System User Manual When the setting is complete,you will see the alarming SMS is different comparing with the traditional Alarms. for example,the Alarming SMS from G10A will be "No.101 of Bao’an avenue,ShenZhen,Front Door Alarm", but for the traditional alarms,it just shows like"Zone 1 alarm" Record an alarm address To make a voice recording for the address ,which makes people who answers to the alarming call from you Host know easily where your house it is, and handle the emergency situation quickly.Just...
  • Page 27 Home Alarm System User Manual on the Host,then press the button [set] shortly again and again,until there is [LA] on the Host,thn Press and Hold the [Set] until you see the [H0] on the host,and now you can start the voice recordingly for the address.

  • Page 28: Change The Password

    Home Alarm System User Manual Change the Password In Set up state,and then call the system via the phone and input [30] / [31] plus the new password [4-digitals] and end by the [#],there will be a long beep from the host which means the setting is successful &...
  • Page 29 Home Alarm System User Manual Phone numbers for receiving the alarm calling from the Host When the system is triggered, the host will call the preset phone numbers, and you can hear the alarming information from the Host, including which zone is triggered and the Address of the Host, you can add up to 6 groups of phone numbers In setup state, call the system ,then input the code of [51]-[56] at the beginning, and plus the phone(mobile) numbers, end by the [#].
  • Page 30 Home Alarm System User Manual And delete the phone numbers And if you would like to set the phone number of 0755-12345678 as the 2 phone number,just make it as the bellow: Also you can send the SMS to make the same setting, for example,You can send the SMS of 888852075512345678# to finish the setting And if you would like to delete the 3 phone number just do it like...
  • Page 31 Home Alarm System User Manual SMS Receiving numbers It Is for the mobile numbers receiving the alarming SMS when the system is triggered, a maximum of 3 groups In the state of programming, input the code of [57]-[59] at the beginning, and plus the mobile numbers, end by the [#].
  • Page 32 Home Alarm System User Manual For example,you would like to add 13811111111 as the 1 SMS receiving number, And you would like to delete the 1 SMS receiving numer Also you can send the SMS of 888857# to delete the 1 SMS receiving number And you can make the same settings via APP under the menu of “SMS Numbers”...
  • Page 33 Home Alarm System User Manual ②User ID It’s provided by your CID monitoring center,and it’s for recognizing the information from the Alarm systems, it’s a 4-digitals numbers How to set it：78 【4 Digit ID】 # For example : to set [1234] as the User ID 78 【1234】...

  • Page 34: Programming The Zones

    Home Alarm System User Manual 73 【1】 # And you can make the same settings via APP under the menu of “Ademco Contact” Programming the zones In the state of programming ,input address code of [60],and then zones number of [01-99],and [1-4] for the Mode of the zone,and then [1-8] for the Location of the Zone,and[0/1] for the siren goes off or not when the zone’s triggered,and press [#] to confirm。...

  • Page 35: Home Arm Mode

    Home Alarm System User Manual “C” for the location of the zone: [1]SOS; [2]Fire; [3]Gas; [4]Door; [5]Hall; [6]Window; [7]Balcony; [8]Boundary “D” for the siren will go off or not while the zone is triggered: [0].the siren does NOT go off while the zone is triggered, [1]the siren will goes off while the zone is triggered For example,: to set zone 1 as the 24-Hours,Fire,and siren on when alarm 【60】...
  • Page 36 Home Alarm System User Manual 【1】Effective,which means the system alarm when the zone’s triggered. For example : to sent zone 1 as home arm zone and the system will alarm while the zone 1 is triggered 【61】 【01】 【1】 【#】 also you can send SMS of 888861011# to make the same setting.

  • Page 37: Alarm Delay Time

    Home Alarm System User Manual Alarm Delay Time In the status of programming, input the address code of [45],and then the DelayTime [AAA] ,then press the [#]to confirm。 【45】 【AAA】 【#】 “AAA”means the Delay Time [001-180 seconds] For example : to set Arm delay time of 80 seconds 【45】...
  • Page 38 Home Alarm System User Manual also you can send SMS of 888846060# to make the same setting. And you can make the same settings via APP under the menu of “Alarming Siren Duration”。 Remote Arm Delay In the status of programming, input the address code of [47],and plus [1/0] to enable the function or Disable the function.then press [#] to confirm,there will be beep from the host when the set is completed.

  • Page 39: Sms Notification For Arm/Disarm

    Home Alarm System User Manual “A” means there will a voice prompt or NOT from siren when arm/disarm 【0】 No voice prompt from siren when arm/disarm， 【1】 T means there will a voice prompt from siren when arm/disarm. also you can send SMS of 8888751# to make the same setting. And you can make the same settings via APP under the menu of “Other Functions”。...

  • Page 40: Key Beep Setting

    Home Alarm System User Manual when the system is armed/disarmed And you can make the same settings via APP under the menu of “Other Functions” Key Beep Setting In the status of programming, input the address code of [ 79],plus [0/1] and then[#] to confirm, there will be beep from the host when the set is completed.

  • Page 41: System Date & Time

    Home Alarm System User Manual SMS receiving mobile numbers And you can make the same settings via APP under the menu of “Other Functions” System Date & Time status programming, input address code [32],and next Year[AAAA],Month[BB],Date[CC],Hour[DD],Minutes[EE],Seconds[FF] and then [#] to confirm. there will be beep from the host when the set is completed.
  • Page 42 Home Alarm System User Manual Scheduling Timely Arm/Disarm ①Scheduling Timely Arm In the status of programming, input the address code of [33-35],and [AA] for hour ,[BB] for the minutes , then then [#] to confirm, there will be beep from the host when the set is completed. How to make it：【XX】...
  • Page 43 Home Alarm System User Manual [AA]：means the hours of the Timing disarm [BB] means the Minute of the Timing disarm。 For example：you would like to set the system disarm automatically at 07:65 AM every day； Just make it as ：【36】 【07】 【55】 【#】 also you can send SMS of 8888360755# to the system to make the same setting.

  • Page 44: Factory Reset

    Home Alarm System User Manual Factory Reset Firstly ,power off the system also to make sure the switch for Backup battery is off ,and then press the [SOS] button and Hold, meanwhile plug into the DC adapter, you will See the “EE” on the Host after 3 seconds.also there is long “beep”...

  • Page 45: Factory Default Value

    Home Alarm System User Manual Factory default value Defense Zone Out Arm Home Arm Type Alarm Information Siren Zone 1 Effective Real Time Door Lock Zone 2 Effective Real Time Hall Zone 3 Effective Real Time Window Zone 4 Effective Real Time Balcony Zone 5...

  • Page 46: Technical Parameter

    Home Alarm System User Manual Technical Parameter Input: DC 12V Built-in backup battery: DC 7.2V Standby Current: ≤25mA Alarming Current: ≤450mA Transmission Range: ≤100m(Open space/No interference) Frequency: 315/433MHz（±75KHz), 2262 / 4.7M 1527/300K GSM Frequency Range: Quad Band 850/900/1800/ 1900 MHz Siren Volume: 120dB Wireless Accessories: 8 remote controllers, 99 detectors Work Temperature: -10℃～+50 ℃...

  • Page 47: Common Malfunction

    Home Alarm System User Manual Common malfunction: In the Disarm Status？ Fail to dial out via the Host Wrong Setting for the phone numbers In the status of Alarm delay SIM card is expired or past due Siren Do Not go off while alarming Power failure？...

  • Page 48: Warranty Certificate

    Home Alarm System User Manual Warranty Certificate Customer Name Customer Name： ： ： ： Customer Name Customer Name Date Date Date Date ： ： ： ： Contact Tel Number Contact Tel Number： ： ： ： Contact Tel Number Contact Tel Number Address：...

Table of Contents