Positioning The Speakers; Setting The Clock - Sony LBT-ZX9 Operating Instructions Manual

Notice for carrying this system
Do the following procedure to protect the disc
mechanism. Use buttons on the system for the
operation.
1
Press ?/1 to turn on the system.
2
Make sure that all discs are removed
from the system.
3
Hold down REPEAT and then press ?/1
until "LOCK" appears in the display.
4
Release ?/1 first, then release REPEAT.
5
Unplug the power cord.
When carrying the front and
surround speakers
Do not carry the front and surround speakers
by their sub panel. Otherwise, the speakers
may be damaged.
Sub panel

Positioning the speakers

There are 3 ways to place the front speakers and
the surround speakers.
Example 1: Place the surround speakers on the
top of the front speakers as shown below.
Surround
Speaker (L) Main Unit
Front
45
Speaker (L)
Listener
Example 2: Place the speakers at an equal
distance from your listening position as shown
below.
Front
Speaker (L)
Example 3: Place the front speakers in one room
and the surround speakers in another room.

Setting the clock

1
2
3
4
5
6
To adjust the clock
Surround
1
Press CLOCK/TIMER SET.
Speaker (R)
"PLAY SET?" flashes in the display.
2
Press M or m (or >+ or –. on the
remote) to select "CLOCK SET?", then
press ENTER.
Front
The hour indication flashes in the display.
Speaker (R)
3
Do the same procedures as step 3 to 6
above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
Main Unit
Listener
Surround
Speaker (L)
Press ?/1 to turn on the system.
Press CLOCK/TIMER SET.
"CLOCK" appears in the display. Then, the
hour indication flashes in the display.
Press M or m (or >+ or –. on the
remote) repeatedly to set the hour.
Press ENTER.
The minute indication flashes in the
display.
Press M or m (or >+ or –. on the
remote) repeatedly to set the minute.
Press ENTER.
The clock starts functioning.
Front
Speaker (R)
Surround
Speaker (R)
9 US