Creating Your Own Program; Program Play - Sony LBT-ZX9 Operating Instructions Manual

Press REPEAT repeatedly until "REP" or
"REP1" lights up in the display.
REP: All the tracks on the disc, or all the tracks
in the album* are played back repeatedly
up to five times.
REP1: A single track is played back repeatedly
until "REP1" is canceled.
* When "ALBM" or "ALBM SHUF" is selected for
MP3 audio tracks.
To cancel Repeat Play
Press REPEAT repeatedly until both "REP" and
"REP1" disappear from the display.
Note
You cannot select "REP" and "ALL DISCS SHUF" at
the same time.
Creating your own
program

— Program Play

You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a tape (page 16).
1
Press FUNCTION repeatedly until "CD"
appears in the display (or press CD on
the remote).
2
Press PLAY MODE in stop mode
repeatedly until "PGM" lights up in the
display.
3
Press one of DISC 1 ~ 5 buttons or
DISC SKIP to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 while "AL" appears in the
display.
To program all the MP3 audio tracks on an
album at once, press ALBUM +/–
repeatedly until the album you want appears
in the display, then proceed to step 5.
4
Press . or > (or –. or >+ on
the remote) repeatedly until the track
number you want appears in the
display.
12 US
The total playing time flashes in the display.
Disc tray
Track
number number
1
EFFECT
X-GROOVE
When programming an MP3 audio track,
press ALBUM +/– to select album, then
press . or > (or –. or >+ on
the remote) repeatedly until the track
number you want appears in the display.
5
Press PLAY MODE.
The track(s) is (are) programmed.
The program step number appears,
followed by total playing time.
6
Program additional discs or tracks.
To program
Other discs
Other tracks on the
same disc
Other tracks on
other discs
7
Press NX (or N on the remote).
Program Play starts.
Other operations
To Do this
Cancel Program Press PLAY MODE repeatedly
Play until "PGM" disappears from the
display.
Clear a track from Press CLEAR on the remote
the end when the playback is stopped.
Tips
• The program you made remains in the system's
memory even after it has been played back. Press
NX (or N on the remote) to play the same
program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number which
exceeds 20.
– the total playing time has exceeded 100 minutes.
– you have programmed an MP3 audio track.
Total playing
time (including
selected track)
PGM
2 3 4 5
j
Repeat steps
3 and 5
4 and 5
3 to 5