Specifications - Sony LBT-G1 Operating Instructions Manual

Specifications

Amplifier section
DIN power output 20 + 20 W
(8 ohms, at 1 kHz, DIN)
Continuous RMS power output
28 + 28 W
(8 ohms at 1 kHz,
10% THD)
Music power output 50 + 50 W
Inputs PHONO: 4.4 mV
Outputs PHONES (stereo phone
jack): accepts
headphones of 8 ohms or
more.
SPEAKER: accepts
impedance of 8 to
16 ohms.
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
( =780 – 790 nm)
Emission duration:
continuous
Laser output Max. 400µW*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Frequency response 40 Hz – 16 kHz (±0.5 dB)
Tape player section
Recording system 4-track 2-channel stereo
Frequency response 60 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
Wow and flutter 0.1% WRMS ±0.3% (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range 87.5 – 108.0 MHz
Aerial FM wire aerial
Aerial terminals 75 ohm unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range 531 – 1,602 kHz
(with the interval set at
9 kHz)
Aerial AM loop aerial
External aerial terminals
Intermediate frequency 450 kHz
Speaker
SS-G1
Speaker system 2-way, bass-reflex type
Speaker units
Woofer: 17 cm dia., cone type
Tweeter: 5 cm dia., cone type
Nominal impedance 8 ohms
Dimensions: Approx. 240 x 420 x
202 mm (9.5 x 16.5 x 8 in)
(w/h/d) incl. projecting
parts and controls
Mass: Approx. 3.2 kg (7 lb 1 oz)
net per speaker
LBT-G1. 3-859-546-13. EN
continued
25