Seat Belts - Chevrolet Express 2020 Owner's Manual

Table of Contents

Advertisement

Carpet Floor Covering
Vinyl Floor Covering
6. Push the pin(s) marked L
down until they are in the
retaining clip. If equipped with
a locking ring, ensure the ring
is open, place the pin inside
the ring, and secure the pin
with the lock ring.
7. Pull on the pin to ensure the
lock ring is closed.
8. If the vehicle is equipped with a
vinyl floor covering, put the
vinyl back to its original
position.
9. Repeat this procedure for the
other seat base.
10. Connect the mini-latch plates
for the lap-shoulder belts by
inserting the latch plates into
the mini-buckles attached at
the outboard positions of the
bench seat. Do not twist the
belts.
11. Check that all locking pins are
locked into place before
operating the vehicle.
Seats and Restraints

Seat Belts

This section describes how to use
seat belts properly, and some things
not to do.
Warning
Do not let anyone ride where a
seat belt cannot be worn properly.
In a crash, if you or your
passenger(s) are not wearing
seat belts, injuries can be much
worse than if you are wearing
seat belts. You can be seriously
injured or killed by hitting things
inside the vehicle harder or by
being ejected from the vehicle. In
addition, anyone who is not
buckled up can strike other
passengers in the vehicle.
It is extremely dangerous to ride
in a cargo area, inside or outside
of a vehicle. In a collision,
passengers riding in these areas
are more likely to be seriously
injured or killed. Do not allow
(Continued)
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents