GMC Savana 2020 Owner's Manual page 181

Table of Contents

Advertisement

180
Driving and Operating
The indicator light for both systems
is in the instrument cluster. This
light will:
Flash when TCS is limiting
wheel spin.
Flash when StabiliTrak/ESC is
activated.
Turn on and stay on when either
system is not working.
If either system fails to turn on or to
activate, a message displays in the
Driver Information Center (DIC), and
comes on and stays on to
indicate that the system is inactive
and is not assisting the driver in
maintaining control. The vehicle is
safe to drive, but driving should be
adjusted accordingly.
If
comes on and stays on:
1. Stop the vehicle.
2. Turn the engine off and wait
15 seconds.
3. Start the engine.
Drive the vehicle. If
comes on
and stays on, the vehicle may need
more time to diagnose the problem.
If the condition persists, see your
dealer.
Turning the Systems Off
and On
Caution
Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.
To turn off only TCS, press and
release
. The appropriate
message will display in the DIC. To
turn TCS on again, press and
release
.
If TCS is limiting wheel spin when
is pressed, the system will not turn
off until the wheels stop spinning.
To turn off both TCS and StabiliTrak/
ESC, press and hold
until the
StabiliTrak/ESC OFF light
on and stays on in the instrument
cluster, then release. The
appropriate message will display in
the DIC.
comes

Advertisement

Table of Contents
loading

Table of Contents