Changing The Command Mode Of The Receiver - Sony HT-DDW650 Operating Instructions (HT-DDW650) Operating Instructions Manual

Changing the command
mode of the receiver
This function is useful when you use 2 Sony
receivers in the same room.
1
Turn off the receiver.
2
Hold down ENTER and press 1/u to
turn on the receiver.
"C.MODE.AVX" appears in the display.
Each time you repeat the procedure above,
the display changes as follows:
C.MODE.AV1 y C.MODE.AV2
Tip
The initial setting is "C.MODE.AV2".
Notes
• The command mode of the supplied remote is
"AV2" and you cannot change this setting.
• If the command mode of the receiver and the
remote is different, you cannot use the remote to
operate the receiver.
US
34