Digital Watchdog Star-Light Plus DWC-MC553WTIR Quick Start Manual

Quick Start Guide
DWC-MC553WTIR
WHAT'S IN THE BOX
Color Deco Rings
Color deco Template
1 Set
rings sheet
Color Deco Rings
Color Deco Rings
Color Deco Rings
Test Video Cable
Test video Quick Setup
1 Set
cable Guide
Test Video Cable
Test Video Cable Test Video Cable
Template Sheet
Screw and
Screw & Torque
plastic 1 Set
wrench
Plastic Anchor-4pcs
anchor-4pcs
Screw &
Screw &
Plastic Anchor-4pcs Screw &
Template Sheet Manual
Plastic Anchor-4pcs
Plastic Anchor-4pcs
External
OSD and
1 Set
signal
controller
External OSD &
Torx Wrench
Signal Controller
External OSD &
NOTE: Download all your support materials and tools in one place
Torx Wrench
External OSD &
Signal Controller External OSD &
Torx Wrench 1. Go to: http://www.digital-watchdog.com/resources
Torx Wrench
Signal Controller
Signal Controller
2. Search your product by entering the part number in
the 'Search by Product' search bar. Results for
applicable part numbers will populate automatically
based on the part number you enter.
3. Click 'Search'. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
Attention: This document is intended to serve as a quick reference for
initial set-up. It is recommended that the user read the entire instruction
manual for complete and proper installation and usage.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours:
9:00AM – 8:00PM EST, Monday thru Friday
STEP 1 – PREPARING TO MOUNT THE CAMERA
1. The mounting surface must withstand five times the weight of
your camera.
2. Do not let the cables get caught in improper places or the electric
line cover can be damaged. This may cause a short or fire.
3. Use the mounting template to mark and drill the necessary holes in
the mounting surface.
Color Deco Rings
4. The camera has a manual IR switch, located under the camera's
lens. You can use this switch to manually turn the IR LEDs on or off
to match your installation needs.
Color Deco Rings
Test Video Cable
Color Deco Rings
Test Video Cable
Screw &
Plastic Anchor-4pcs
Test Video Cable
Screw &
Plastic Anchor-4pcs
1 Set
External OSD &
Template Sheet Manual Torx Wrench
Screw & Signal Controller
Plastic Anchor-4pcs
1 Set
External OSD &
Manual Torx Wrench
Signal Controller
1 Set
External OSD &
Torx Wrench
Signal Controller
EXTERNAL CONTROLLER
digital-watchdog.com
STEP 2 – CABLING THE CAMERA TO
EXTERNAL DEVICES
Pass the wires through the mount bracket and make all
necessary connections. Connect the BNC cable and power
cables to the camera.
Power
Requirements
DC12V
IR Switch
ON/OFF
Quick Start Guide
Power Consumption
DC12V (LED off): 1.98W, 165mA
DC12V (LED on): 2.62W, 218mA