Labeling An Md - Name Function - Sony DHC-MD595 Primary Operating Instructions Manual

Labeling an MD
— Name Function
You can create titles for your recorded MDs and
tracks as follows.
During recording
If "TEXT" flashes in the display during recording
a CD, you can record the track titles on the MD
(see page 26).
After recording
Use Name Function on this page.
You can input a total of approximately 1700
characters for the disc title and track titles on a
single MD.
4
TCURSOR
–
1
1
Press FUNCTION repeatedly to switch
the function to MD.
To label a track, press – or + repeatedly until
the desired track number appears.
38
2
3
2,3
4
CLEAR
CURSORt
+
6
Press NAME EDIT/SELECT.
The text input screen appears, and the cursor
flashes.
Cursor
Press NAME EDIT/SELECT to select
the desired type of character.
Each time you press the button, the display
changes as follows:
Selected AB* (Upper cases) t Selected ab
(Lower cases) t Selected 12 (Numbers) t
Selected AB (Upper cases) t ...
* Press number 1 repeatedly to display the
following symbols.
' – / , . ( ) : ! ?
In addition, when the symbols above appear in
the display, press – or + repeatedly to display
the following symbols.
& + < > _ = " ; # $ % @
Enter a character.
If you've selected uppercase
or lowercase letters
1 Press the corresponding letter/number
button repeatedly until the character to be
entered flashes.
Or, press the button once and press – or +
repeatedly.
2 Press CURSORt.
The flashing character is entered and the
cursor shifts to the right.
If you've selected numbers
Press the corresponding number button.
The number is entered and the cursor shifts
to the right.
`