Changing The Recorded Level After; Recording - S.f Edit Function - Sony DHC-MD595 Primary Operating Instructions Manual

Changing the recorded
level after recording
— S.F Edit Function
You can change the volume of recorded tracks
using S.F (Scale Factor) Edit. The original track is
recorded over at the new recording level. When
changing the recording level, you can select Fade-
in Recording to gradually increase the signal level
at the start of recording, or Fade-out Recording to
gradually decrease the signal level at the end of
the recording.
4,5,
6,8,9
4,5,
6,7
1
Changing the overall
recording level
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press PLAY MODE repeatedly until
both "SHUFFLE" and "PROGRAM"
disappear.
3
Press MENU/NO to display "Edit
Menu".
4
Press – or + repeatedly until "S.F Edit?"
appears, then press ENTER/YES.
5
2
Press – or + repeatedly until
"Tr Level?" appears, then press
ENTER/YES.
6
Press – or + repeatedly until the track
number you want to change the
3
recording level appears, then press
ENTER/YES.
4,5,
"Level 0dB" appears in the display.
6,7
continued
49