Sony DHC-MD595 Primary Operating Instructions Manual page 56

Mini hi fi component system
Table of Contents

Advertisement

Waking up to music (continued)
4
Press – or + repeatedly until "DAILY
SET?" appears, then press ENTER/
YES.
The hour indication flashes.
5
Set the time to start play.
Press – or + repeatedly to set the hour, then
press ENTER/YES.
The minute indication flashes.
Press – or + repeatedly to set the minute,
then press ENTER/YES.
The hour indication flashes again.
6
Set the time to stop play following the
above procedure.
7
Press – or + repeatedly to select the
desired sound source.
The indication changes as follows:
t TUNER y MD PLAY T
t TAPE PLAY* y CD PLAY T
* Select this to use another component (the
optional tape deck TC-TX595) as the sound
source.
8
Press ENTER/YES.
The start time, the stop time, the sound
source and volume appear in turn, before the
original display returns.
9
Press ?/1 to turn off the system.
56
To change the setting
Start over from step 1.
If you made a mistake, press TCURSOR and
return to the point you want to change during steps
5 to 7, then change the setting.
To check the setting/activate
the timer
1 Press CLOCK/TIMER SELECT, then press –
or + repeatedly until "DAILY SELECT?"
appears.
2 Press ENTER/YES.
To cancel the timer
Press CLOCK/TIMER SELECT, then press – or +
repeatedly until "TIMER OFF?" appears. Then
press ENTER/YES.
Tip
When you connect the optional tape deck TC-TX595
to the system, you can activate the tape deck using the
Daily Timer function without setting the timer on the
tape deck.
Notes
• You cannot activate Daily Timer and recording
timer at the same time.
• When you use the Daily Timer at the same time as
the Sleep Timer, the Sleep Timer setting has
priority.
• Do not operate the system from the time the system
turns on until the play starts (about 30 seconds
before the preset time).
• If you use another component (except for the
optional tape deck TC-TX595), you must set the
timer on both systems to the same time.
• You cannot use the components connected to the
DIGITAL OPTICAL IN jack or ANALOG IN jack
as the sound source for Daily Timer.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents