Advertisement
STEP 2
Using a straight edge, gently peel up the back sticker
STEP 3
Set the cool sticker aside so you can mount it on your machine later
STEP 4
With a #2 Phillips, hand operated screw driver, remove 4 screws from the back plate. Save
these screws, they will be used to install the diaphragm cover plate.
For additional technical information on this and all MB QUART products, go to
the "SUPPORT" tab at MB QUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
Advertisement
