Advertisement
MB QUART RZR Kick Panel pods
Thanks for choosing MB QUART. These 8 inch compression horn speaker components have
been meticulously engineered to install into your Polaris RZR. They are part of our Staged RZR
Tuned Audio Systems family of products. See all the components, upgrades and Stages
available for RZR on the website MBQUART.com
We have made the install process so simple, you will be in and out of the machine in about
an hour.
IMPORTANT – Before you mount the speakers into the pods and mount the pods to the
RZR, you need to prepare the rear of the compression horn speakers. This entails removing
the back plate from each speaker and covering the exposed compression horn diaphragm
with the included cover.
The purpose of this process is to remove some of the depth of the speaker which in turn
reduces the amount of space you sacrifice in the foot well – brilliant.
IN THE BOX
8 inch speakers (2)
RZR Kick Panel pods (2)
Compressions Horn Diaphragm covers (2)
Mounting Hardware (4 bolts, 4 nylon locking nuts, 8 washers)
Stainless Speaker Mounting screws (8)
SAFETY
Always make your machine safe before installing any accessories
Turn the ignition off and remove the key
Remove the negative terminal of the battery
Safety Glasses - always wear eye protection
TIME & TOOLS
You will need to prepare the Compression Horns before permanently mounting them to the
pods. To keep installation quick it is best to mount the pods empty with no speakers installed.
This will keep install to about 1 HOUR.
For additional technical information on this and all MB QUART products, go to
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
the "SUPPORT" tab at MB QUART.com
©2018 Maxxsonics USA
Advertisement
