Download Print this page

MB QUART MBQ-POD Manual page 3

Utv & rzr tuned audio systems. 8 inch compression horns

TOOLS Required



T-40 Torx Bit Driver



Sharpie or Marker



Painters Tape 2 inch



1/2 inch Socket



#2 Philips Screw Driver



1/2 inch open wrench



Small or Angled Ratchet



Work light



Drill



1/8 inch drill bit



5/16 inch drill bit

NH1-120B Preparation

Preparing your Compression Horn Diaphragm

In order to fit your compression horn speakers into the pod, you need to remove the back plate.

This keeps the mounting depth of the pod as shallow as possible. We designed the pods with a

simple modification to the rear of the speaker.

We provide a protective plate because it is very important to the performance of your

compression horns to cover the compression diaphragm element.

STEP 1

Working on a flat surface, turn your speaker face down

For additional technical information on this and all MB QUART products, go to

There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

the "SUPPORT" tab at MB QUART.com