Optional Components; Hooking Up Optional Components - Sony CMT-M90DVD Operating Instructions Manual

Optional Components

Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
MD deck / VCR
From the audio
output jacks of an
MD deck / VCR
A AUDIO IN MD (VIDEO) jacks
Use audio cords (not supplied) to connect an
MD deck or VCR to these jacks. You can then
listen to analog audio from the MD deck or
VCR through this system.
B OPTICAL OUT jack
Use a digital optical cable (square, not
supplied) to connect an amplifier, MD deck, or
DAT deck with a digital optical input jack. You
can then output the digital audio to the
component from this system. If the jack is
covered with a cap, remove it before use.
Optional digital
component
To the digital input
jack of an optional
digital component
C S VIDEO OUT jack
Use an S video cable (not supplied) to connect
an optional component (such as a TV) to this
jack. You can then output the video to the
component from this unit, and enjoy higher
quality video images.
D VIDEO OUT jack
Use a video cable (supplied) to connect an
optional component (such as a TV) to this jack.
You can then output the video to the
component from this unit, and enjoy the video
images of DVDs, etc.
Optional TV
To the video
To the S video
input jack of a
input jack of a
TV
TV
GB
45