Thread Drawing Lever Height Adjustment - Janome Continental M7 Professional Service Manual

The maximum height of the thread drawing lever should be between 5.5 to 5.7 mm from the
hook race.
(View A)
Thread drawing lever
Hexagonal
socket bolt

Thread drawing lever height adjustment

Thread drawing lever
Hook race
Hexagonal socket bolt
5.5 to 5.7 mm
Hook race
1. Remove the needle plate.
2. Loosen the hexagonal socket screw.
When the thread drawing lever is at the highest
position, adjust the drawing lever so that the distance
between the hook race and the drawing lever is 5.5 to
5.7 mm.
3. Tighten the hexagonal bolt.
4. Attach the needle plate.
(View A)
26