To Adjust Thread Drawing Lever - Janome MC6700P Service Manual

The maximum height of the thread drawing lever should be between 5.5 to 5.7 mm.
Hexagonal socket bolt
(View A)
Thread drawing lever
Hexagonal
socket bolt

To adjust thread drawing lever

Thread drawing lever
(View A)
5.5 - 5.7 mm
Hook race
1. Remove the needle plate.
2. Loosen the hexagonal socket screw.
When the thread drawing lever is at the highest
position, adjust the drawing lever so that the distance
between bobbin holder and the drawing lever is 5.5 -
5.7 mm.
3. Tighten the hexagonal bolt.
4. Attach the needle plate.
27