Homa HRS Series Original Instruction Manual page 14

The upper fastening (Item 2) must be attached in the basin first of all. Use the supplied anchor rods and bonding
anchor cartridges for this purpose.
In the next step, attach the square tube (Item 4, to be provided on site) to the upper and lower fastenings (Item 1).
Next, hold the upper fastening on the anchor rods intended for that purpose and fasten the anchor rods with the
nuts. The position of the lower fastening has now been determined. Use the supplied anchor rods and bonding
anchor cartridges for fastening it.
44
No. Description
1 lower fastening
2 upper fastening
3 angle clamp bracket
4 square tube
5 mixer
6 motor bracket
7 cable anchor clamp
8 stainless steel wire
9 lifting gear
10 floor-mounted box column