Table of Contents
Advertisement
•
Operating Voltage / Direction Control
The operating voltage of the system is to check for conformity according to type plate data.
The protective cap located on the cable must be removed just before the electrical connection.
After electrical connection, the correct direction of the stirring propeller mixer must be inspected. The
propeller must rotate clockwise when viewed from the motor.
If the rotational direction of the stirring propeller is incorrect, two of the three conductor phases (L1, L2,
L3) that are directly supplied from the mains must the interchanged.
Assembling the motor bracket to the mixer
Fasten the mixer to the motor bracket (Item 12) as illustrated, using two cylinder head screws (Item 1), one
cylinder head screw (Item 2) and the associated U-washers (Items 3 & 4).
Lay the connecting cable between the pipe clamps (Item 6) and screw it to the motor bracket using two cylinder
head screws and U-washers (Items 5 & 4). Great care should also be taken to ensure that the cable is always laid
or assembled on a large radius, so that any sharp bend in the cable is
Lowering and guiding mechanisms
Before assembling the lowering and guiding mechanism, the local conditions governing installation (basin shape,
circulation conditions etc.) must be ascertained. It must be ensured that the mixer is freely mobile in the built-in
condition and that additional fittings have no effect on flow.
prevented.
43
Advertisement
Table of Contents
