Getting Started; Hooking Up The System - Sony CMT-CPZ1 Operating Instructions Manual

Getting Started

Hooking up the system

Perform the following procedures 1 to 3 to hook up your system using the supplied cords and
accessories.
Right speaker
1 Connect the speakers.
Connect the right and left speaker cords to
the SPEAKER terminals as shown below.
2 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
AM loop antenna
FM lead antenna
1
2
3
Note
To prevent noise pickup, keep the antennas away from
the speaker cords.
3 Connect the mains lead to mains.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor). To turn
on the system, press ?/1.
Left speaker
AM loop antenna
Extend the FM lead
antenna horizontally
continued
GB
9