BenQ MS524AE User Manual page 49

Description of each menu
• The default values listed in this manual, especially on pages 49-57, are
for reference only. They may vary between the projectors due to the
continuous improvement to the products.
FUNCTION
Wall Color
Aspect Ratio
Keystone
Position
Phase
H. Size
Digital Zoom
http://www.pureglare.com.au
DESCRIPTION
Corrects the projected picture's color when the projection
surface is not white. See
details.
There are four options to set the image's aspect ratio depending
on your input signal source. See
page 35 for details.
Corrects any keystoning of the image. See
on page 29 for details.
Displays the position adjustment page. To move the projected
image, use the directional arrow keys. The values shown on the
lower position of the page change with every key press you made
until they reach their maximum or minimum.
This function is only available when a PC signal
(analog RGB) is selected.
Adjusts the clock phase to reduce image
distortion.
This function is only available
when a PC signal (analog RGB) or YPbPr
(Component) is selected.
Adjusts the horizontal width of the image.
This function is only available when a PC signal
(analog RGB) is selected.
Magnifies or reduces the projected image. See
searching for details" on page 34
"Using Wall Color" on page 37
"Selecting the aspect ratio" on
"Correcting keystone"
for details.
for
"Magnifying and
Operation 49