Operating In A High Altitude Environment; Adjusting The Sound - BenQ MS524AE User Manual

Operating in a high altitude environment

We recommend you use the High Altitude Mode when your environment is 1500
m –3000 m above sea level, and ambient temperature is between 0°C–35°C.
Do not use the High Altitude Mode if your altitude is between 0 m and
1500 m and ambient temperature is between 0°C and 35°C. The projector
will be over cooled, if you turn the mode on under such a condition.
To activate the High Altitude Mode:
1. Press MENU and then press
menu is highlighted.
2. Press
confirmation message displays.
3. Highlight Yes and press OK.
Operation under "High Altitude Mode" may cause a higher decibel operating noise
level because of increased fan speed necessary to improve overall system cooling and
performance.
If you use this projector under other extreme conditions excluding the above, it may
display auto shut-down symptoms, which is designed to protect your projector from
over-heating. In cases like this, you should switch to High Altitude mode to solve
these symptoms. However, this is not to state that this projector can operate under
any and all harsh or extreme conditions.

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speaker(s).
Be sure you have made a correct connection to the projector audio input. See
"Connection" on page 20
Muting the sound
To temporarily turn off the sound, press
the remote control, or:
1. Press MENU and then press
the SYSTEM SETUP: Advanced menu
is highlighted.
2. Press
press OK. The Audio Settings page
displays.
3. Highlight Mute and press
Adjusting the sound level
To adjust the sound level, press VOL
the remote control, or:
1. Repeat steps 1-2 above.
2. Press
/
http://www.pureglare.com.au
Operation
42
to highlight High Altitude Mode and press
for how the audio input is connected.
to highlight Audio Settings and
to highlight Volume and press
to select a desired sound level.
/ until the SYSTEM SETUP: Advanced
on
/ until
/ to select On.
/ on
/ to select On. A