Audio Settings - inout NP2 Quick Manual

NP2/NP5 QUICK GUIDE v. 1.5

Audio settings

Volume out: level preamplified and amplified audio output
Fade In: setting the initial fading time of playing the audio file
Fade Out: setting the finaly fading time of playing the audio file
Cross Fade In: setting the fading time of the Line In before playing the audio file.
Cross Fade Out: setting the fading time of the Line In after playing audio file
Amp. Mute: - Auto: power amplifier is active only during the audio files playing.
When NP2/NP5 is in STOP mode the power amplifier is in Standby.
- Disable: power Amplifier always active, also when NP2/NP5 is in STOP
mode.
Audio line in mix: switch on/off audio Line In
Line In Level: setting level Line In when player in stand by
Line In Level Mix: setting level Line In of the background during the playing of the audio file.
L/R Line In Mode: setting Line In mode Stereo / Mono / Left / Right
Line Out Mode: setting Line Out mode Stereo / Mono
Bass Level: setting Low tone level control
Bass Freq: setting Lower limit frequency
Treble Level: setting High tone level control
Treble Freq: setting High limit frequency
Pag. 9