inout NP2 Quick Manual page 28

Digital Inputs Set
Digital Inputs
# bits for:
Time Persistence:
Continuos Play:
Continuos Play:
Interrupt:
Interrupt:
Restart Play:
IMPORTANT:
NP2/NP5 QUICK GUIDE v. 1.5
Dedicated inputs for Playlist Direct or Binary Code, the remaining ones can
be configured as outputs
Set the persistence time of the input command (time to wait before
NP2/NP5 is able to interpret the input command).
- Activated the input, the relative item in the Playlist is played: at the end of
it, NP2/NP5 goes in standby, awaiting a further activation.
- The position of the last item played is stored in memory, in order to start
out again always by the next one in case of restart.
- Activated the input, the relative item in the Playlist is played: at the end of
it, NP2/NP5 goes in standby, awaiting a further activation.
Activating the input once again or if the activation remains, the successive
file is played.
- The playlist is activated in loop, as long as the activation of the relative
logical input remains activated.
- The position of the last item played is stored in memory, in order to start
out again always by the next one in case of restart.
Repeated activations or deactivations of the same input or of other inputs
does not influence the playing of the file.
Repeated activations or deactivations of the same logical input does not
influence the playing of the file; only the activation of a different input
blocks the playing underway and activates the relative playlist.
From the moment that the same logical input is reactivated, the restart of
the file is commanded, even if it is playing. The activation of a different
input blocks the playing underway and activates the relative playlist.
save the settings with the button apply/save
Pag. 27