inout NP2 Quick Manual page 11

NP2/NP5 QUICK GUIDE v. 1.5
I/O settings
I/O Config: Setting logic port input or output
Out Mode: Output logic port setting: free, play, blink when in pause / play / stop.
Pulse Mode: Setting the output logic port in pulse mode, set the pulse duration time in tenths of
a second.
Inversion: Setting the mode of input/output active high or active low.
- OFF active-low input mode; the functioning of the input is connected to the
ground/GND of the device.
- ON active-high input mode; the functioning of the input is applied with a positive
voltage between 5 and 12Vdc.
Value: Test function Output logic port
IMPORTANT:
save the settings with the button apply/save
Pag. 10