inout NP2 Quick Manual page 20

Standard Player configuration
NP2/NP5 works just like a standard player in this mode and does not require any specific
programming or playlist file. The tracks will be played in the sequence in which they are
memorised in the flash memory; if a block of data is transferred then the written sequence in the
flash memory will depend on the operating system used.
Digital I/O Mode > Player
The logical inputs can be used for player control (see example application at the end of guide).
IO1 previous file
IO2 Stop file reproduction.
IO3 Play/Pause file
IO4 next file
IO5 reduce output volume
IO6 increase output volume
IO7 free - logic ports are freely configurable as I/O settings webpage.
IO8 free - logic ports are freely configurable as I/O settings webpage.
Time Persistence:
Power On Auto Play:
IMPORTANT:
NP2/NP5 QUICK GUIDE v. 1.5
set the persistence time of the input command (time to wait before
NP2/NP5 is able to interpret the input command)
In this mode, NP2/NP5 will automatically start to play the audio file when
the device is power on.
save the settings with the button apply/save
Pag. 19