Reset To Default Settings - inout MS20-NAS Quick Manual

Reset to default settings

Save an empty file on a USB key to restore the InOut MS20-NAS to the factory settings.
The filename must be servermanager-reset.tar.gz
Insert the key on a USB port and power cycle the device.
The reset will affect the following:
• LAN settings will be set to the default value
• admin's password will be set to the default value
• DHCP server will be set to the default value
• Proxy will be disabled
• NAS will be set as local DNS Server
Sharing policy, users and user-groups will not be affected.
MS20 - NAS Quick Guide v.1.0
Pag. 10