Product Operation Methods - NOYAFA NF-8208 Instruction Manual

Product operation methods

Start and display:
Carry out self-checking at the same time (The dotted line dynamically
displays the course of self-checking from left to right):
5 seconds or push any arbitrary key to display main menu.
Main menu display:
There are four functions to be chosen on main menu.
1. WireMap --- Wiring diagram measurement to check end-to-end con-tinuity
of cables M, L, R and locate error.
2. Pair & Length---Pair and measure length to verify cable length,open circuit
distance, pairing .
3. Coax/Tel---Coaxial cable and telephone line measurement.
4. SETUP---Calibrate
Wiring diagram (WIREMAP) test function:
After entering the wiring diagram (WIREMAP) test function, the tester shall
carry out wiring diagram (WIREMAP) test and displays as follows while
checking is being undertaken:
05
N e t W o r k
C a b l e T e s t e r
1 . w i r e m a p
2 . p a i r &l e n g t h
3 . c o a x / t e l
4 . s e t u p
----T e s t i n g ----
12345678...
Your excellent helper in cable test!