Playing A Cd; Basic Playback Operations - Sony CDP-D12 Operating Instructions Manual

Playing a CD

The basic CD playback procedure and operations are explained below.
CD insertion slot
1
Press the POWER switch to turn on the player.
2
Insert a CD with its label side up into the CD
insertion slot.
When you insert the CD, it is automatically pulled
in and loaded.
3
Press the HX button (or the H button on the
remote) to start playback.
You can also start playback by pressing the AMS
control.
If necessary, rotate the AMS control (or press >
on the remote repeatedly) to locate the track you
want to start playing from.

Basic playback operations

To Do the following:
Stop play Press the x button.
Press the HX button (or the X button
Pause play
on the remote).
Resume play Press the HX button (or the X or H
after pausing button on the remote).
Locate a Rotate the AMS control clockwise (or
press the > button on the remote
succeeding track
repeatedly)
Locate the Rotate the AMS control
beginning of the counterclockwise (or press the .
current track or a button on the remote repeatedly).
preceding track
Eject the CD* Press the A EJECT button after
stopping play.
*
The CD is ejected halfway and stops. After about 16 seconds,
the CD player pulls in the CD again to protect it.
To use headphones
Connect headphones to the PHONES jack and adjust
the volume by turning the PHONE LEVEL control.
To lock the A EJECT button
To prevent ejection of the CD by mistake during
playback or pause, the A EJECT button can be locked
by a menu operation.
1
While the player is stopped, press the MENU/
EXIT button.
"MENU Mode" appears in the display.
2
Rotate the AMS control until "PLAY/PAUSE"
appears in the display, and then press the control.
3
Rotate the AMS control until "EJ. Disable"
appears in the display, and then press the control.
4
Press the MENU/EXIT button to complete the
setting.
To unlock the A EJECT button
Do the procedure above, selecting "EJ. Enable" in step
3.
25