Table of Contents
Advertisement
Available languages
Available languages
7.3 Replacing the filter
The filter should be replaced regularly for optimal results. Always make sure that
the filter is in place to prevent particles such as dead skin cells or debris from
entering the motor.
EN
1.
Gently remove the tip (
2.
Replace with a new filter and put the tip back into place.
7.4 Replacing the O-ring
The O-ring should only be replaced if it is damaged or worn. Always make sure
that the O-ring is in place, otherwise the device will not work properly.
1.
Gently remove the tip (
2.
Replace with a new O-ring and put the tip back into place.
8.
Storage
All parts must be completely dry before being stored in the pouch
U
can also use the charging cradle
Do not wind the USB cable
U
9.
Troubleshooting
Some problems may be caused by minor faults that you can fix yourself. To do so,
follow the instructions in the following table. If it is still not possible to resolve the
problem, contact customer service. Do not repair the device yourself.
Fault
The device won't
turn on.
8
9
/
8
9
/
13
round the device.
Possible cause and solution
Make sure the USB adapter is securely plugged in the
charging cradle, and plugged into a working mains socket
for at least one hour. The battery symbol on the LCD display
should indicate that device is charging. If the battery symbol
does not come on, contact our customer service.
10
10
11
/
/
) and discard the filter
10
11
/
/
) and discard the O-ring
7
as a stand to hold the device.
14
.
15
.
17.
You
Advertisement
Chapters
Table of Contents
