Table of Contents
Advertisement
Important
Do not set duplicate IDs. If you connect more than one machine with the same ID at the same time,
the computer might shut down or make driver installation impossible.
Connecting Multiple Units
Click the [Settings] tab.
Click [Set ID].
The [Set ID] selection screen opens.
Select any unused ID, and click [OK].
"A" is assigned as the ID of the machine by default.
Since A is assigned to the first machine, be sure to
select B, C, or D for subsequent machines.
When the window shown to the left appears,
click [OK].
Right-click
(the VPanel icon) in the task
tray, and select "Exit."
Temporarily exit VPanel.
2. Installation and Setup
2. Installation and Setup
51
Advertisement
Table of Contents
