Table of Contents
Advertisement
Specifications
Millable material*
Operating speed
Spindle speed
Rotary axis travel angle
Number of milling burs
housed
Attachable milling bur
Compatible
compressed air
Interface
Control command set
Power requirements
Power consumption
Operating noise
External dimensions
Weight
Installation
environment
Included items
* Even when made from the described materials, some workpieces cannot be milled due to specifications or
physical properties. For more information, contact your authorized Roland DG Corporation dealer.
System Requirements for USB Connection
Computer
USB cable
Glass ceramics, Composite resin
Pin type
XYZ axis: 6 to 1800 mm/min. (0.24 to 70.9 in./min.)
15,000 to 60,000 rpm
A: ±360°
4
Shank diameter: 3 mm, dedicated milling bur
0.6 to 0.8 MPa
USB (compliant with Universal Serial Bus Specification Revision 1.1)
RML-1, NC code
AC 100 to 240 V ± 10%, 50/60 Hz (overvoltage category II, IEC 60664-1), 1.9 A
Approx. 200 W
During operation: 70 dB (A) or less (when not cutting), during standby:
48 dB (A) or less
Width x depth x height: 480 × 538 × 599 mm (18.9 × 21.2 × 23.6 in.)
53 kg (117 lb.)
Indoor use at altitudes up to 2000 m
Temperature: 5 to 28°C (41 to 82°F), Humidity: 35 to 80% (non-condensing)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage: 1440 V
Long-term temporary overvoltage: 490 V
Power cord, USB cable, manuals, software CD, automatic correction jig,
hexagonal screwdriver, hexagonal wrench, etc.
Model preinstalled with the 32- or 64-bit edition of Windows 7, 8.1 or 10 an
upgraded computer originally preinstalled with Windows Vista or later
Use the included USB cable.
DWX-4W
Width × depth × height: max. 40 × 20 × 20 mm
(1.5 × 0.8 × 0.8 in.)
Specifications
57
3. Appendix
Advertisement
Table of Contents
